Monitors do not wake behind a dock on a Mac

17 November 2026 · Martín Acuña Lledó · Applies to macOS 13 Ventura through macOS 27

This is a different problem from windows moving. The Mac wakes, the keyboard works, but one of the monitors on the dock stays black, or both do. You press the monitor's buttons, unplug it, or power-cycle the dock, and then it comes back. I make a window restore app, and it cannot fix this, so this page is about what can: what Apple says, what dock users report, and what to try in order.

What people report

The pattern: the same monitors usually work when plugged straight into the Mac, and the failure appears with a particular dock, cable or monitor setting. That makes it a hardware handshake problem first, which is why the fixes below are about cables, ports and firmware.

Apple's checklist

Apple's support article "If your external display is dark or low resolution" lists these steps. They are the right place to start:

  1. Check the cables. Apple says a display can stay dark, or use a lower resolution or refresh rate, if the cable or adapter does not support the display's resolution and refresh rate. A Thunderbolt or USB-C adapter has to support DisplayPort Alt Mode, Thunderbolt 3 or Thunderbolt 4.
  2. Take the dock out of the picture. If the display is on a hub or dock, Apple says to connect it to a port directly on the Mac. If it then wakes every time, the dock is part of the problem.
  3. Check what your Mac supports. A display can stay dark if it goes beyond the number of external displays your Mac supports, or is set above a supported resolution or refresh rate. The limits are in your Mac's specifications.
  4. Make the Mac detect it. Disconnect and reconnect the display, or put the Mac to sleep and wake it, or hold Option in System Settings → Displays to show the Detect Displays button and click it.
  5. Allow the accessory. On Apple silicon laptops, the Mac may ask whether to allow the display to connect, and the display stays dark if you do not allow it.
  6. Update the firmware. For non-Apple displays, Apple says to make sure the display runs the manufacturer's latest firmware.

Dock and monitor fixes

If the direct connection works and the dock does not, these are the things users report helping. None is guaranteed, and all are easy to undo:

If none of that works and the monitor fails with the dock but not without it, the honest options are a different dock or connecting that monitor directly. More dock advice is in a MacBook, a dock and different monitors.

What none of this guarantees

How Many Displays handles it

It does not fix this, and no window app can. If a monitor never comes back, there is no screen to put windows on. Many Displays does not wake monitors, reset docks or change how macOS detects displays.

What it does is wait. While displays are coming back it saves nothing, so the half-woken state is never recorded, and it only moves windows once the displays have been stable for a few seconds. When the stubborn monitor finally appears, after you press its button or replug it, that counts as a new reconnection: it puts back that monitor's arrangement, resolution and rotation and returns its windows to it. You still have to get the monitor to wake. It just saves you from dragging everything back afterwards. If that is the part that annoys you, the free trial lasts 14 days, with no account and no card.

Download the free trial How it works

Questions

Why does only one of my monitors wake up behind the dock?

When the Mac wakes, each monitor behind the dock has to come back and be detected again. With some combinations of Mac, dock, cable and monitor that handshake fails for one screen, which stays black until you wake it by hand. Users report it with Thunderbolt docks and with DisplayLink docks, and it is not something macOS settings alone control.

What should I try first?

Follow Apple's own order: check the cables and that they support the display's resolution, plug the monitor directly into the Mac to see whether the dock is involved, use Detect Displays by holding Option in System Settings → Displays, and update the monitor's firmware. Then try the monitor's DisplayPort version setting and the dock's firmware.

Does changing DisplayPort 1.4 to 1.2 help?

For some users. In a MacRumors thread about a CalDigit TS3 Plus, one user recommends switching the monitor from DisplayPort 1.4 to 1.2, and another says it made the screen wake but caused other problems. It is worth trying if your monitor has the option, and easy to undo.

Can a window restore app fix monitors that do not wake?

No. If a monitor does not come back, there is no screen to put windows on. A window app can only help once the monitor shows up, by putting the windows back on it.